SunGoldPower 18000W 48V Split Phase Pure Sine Wave Solar Inverter Charger

SunGoldPower 18000W 48V Split Phase Pure Sine Wave Solar Inverter Charger

Highlights

• LF-PV Series Pure Sine Wave Inverter is a combination of an inverter, AC charger, Mppt solar charger and Auto-transfer switch into one complete system.
• The split-phase inverter requires 240VAC input and can provide 120VAC or 240VAC output power for all kinds of appliances, and it can output 50 or 60Hz via the SW4.
• AC/Battery Priority: Our inverter is designed with AC priority by default, you can choose the battery priority by SW5 switch.
• Features: Smart Remote Control, Automatic Generator Starting (AGS), Support Solar Panel with MPPT Function, Suitable for different kinds of batteries.
• Application: for all the kinds of load: refrigerators, freezers, microwaves, dryers, air conditioners, pumps and all the big home and business applications.

Sungoldpower 18000W 48V split phase inverter is built for the purpose of running the whole house, business office or large RV, which is perfect for using with renewable solar and using as an off-grid home and business back up power supply. The split-phase inverter requires 240VAC input and can provide 110/120VAC OR 220/230/240VAC output power for all kinds of appliances.

This inverter charger is built with UPS function to provide uninterrupted power to run household electric devices. The solar inverter comes with an internal transfer switch, so you don’t have to do anything when the power goes out. All the devices you have selected will be connected to the back-up power source automatically. In fact, you will not even notice that the power cut happened.

• It is built-in 100 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank.   
• Built-in solar controller, Maximum solar input voltage 145V, Maximum solar input current 80A, can also connect with external controller.
• Low Frequency Inverter, High Quality, your best choice for your 48V home system.

This full sine wave power inverter was designed with top quality and durability in mind and is built to survive 10+ years in the harshest conditions . Our full sine wave 18KW inverter works with very little power loss, outputs an average THD of 3% , its idle consumption is 270 watts, and its peak DC to AC efficiency is notably 90%

The AC/battery priority switch is SW5. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. For solar systems, it is better to choose battery priority.

The Big Power Low Frequency Off Grid Solar Inverter is a multi-function inverter, combining functions of inverter, solar charger controller and battery charger to offer uninterruptible power support. the solar controller is Max 80A and 145V Input,You can disable the inbuilt solar controller, connect with external solar controller, or use for other systems (it is not limited for solar system)

The big power inverter has is the direct-connect terminal block, which allows users to surpass the 18,000 watt capacity and harness its 300% surge power (up to 54,000 watts for 20 seconds as previously noted). it is emergency backup power for residences, businesses and large off grid applications.

It is also perfect for off grid system or use AC power supply for home power emergencies, which can keep the power supply uninterrupted in the event of an power failure. It can detect the loss of power and switch over to get power form a connected battery bank seamlessly to keep the power supply constant.

Our Solar inverters are also instrumental when it comes to solar energy harvesting and increasing the system efficiency. When the solar panels produce electric energy, the electric current flows to the solar inverter. The inverter then converts the DC into AC. From the inverter, the AC energy is ready for use to power the various appliances.

Another popular application of this inverter is for RV and vehicle upfitting applications, such as powering lights and other appliances in an off-grid cabin. It also can provide electricity for a mobile business or mobile office, and running camping equipment. it is the best choice for your big power system.

Specifications

Main Features

• 18KW split phase pure sine inverter charger DC 48V AC 240V input AC output 120V/240V
• Auto Generator Start (AGS)
• Support Solar Panel with MPPT Function
• Include Battery Temperature Sensor (BTS) and Remote Control
• 8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）
• Compatible With All kind of Home & Office Appliances
• Powerful Charge Rate Up to 100Amp, Selectable From 0%-100%
• Built-in transfer switch and battery charge, backup or off grid power solutions
• AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
• 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
• 8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
• 15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator
• Continuous Output Power :18.0KW
• Surge Rating(20s) :54.0KW
• Output Waveform :Pure Sine Wave
• AC Output Voltage: 120V and 240V
• AC Input Voltage: 240V( not suitable for AC 120V input )
• DC Battery Voltage:48Vdc
• Solar charger Current:80Amp
• AC Battery charger:100±5Amp
• Output Frequency :50Hz /60Hz
• Typical transfer Time :10ms(Max)

DC Input

• Nominal Input Voltage :48.0Vdc
• Minimum Start Voltage :40.0Vdc / 42.0Vdc
• Low Battery Alarm :42.0Vdc / 44.0Vdc
• Low Battery Trip :40.0Vdc / 42.0Vdc
• High Voltage Alarm :64.0Vdc
• Low Battery voltage recover :62.0Vdc
• Power Saver on Idle Consumption: 50W
• Power Saver off Idle Power: 270W

Charger

• Output Voltage: Depends on battery type
• Battery Initial Voltage for Start Up: 40-62.8V
• Over Charge Protection Shutdown :62.8V
• Charger Breaker: 100A
• Input Voltage Waveform :Sine wave (Grid or Generator)
• AC input range:184-253Vac/140-270Vac
• Nominal Input Frequency :50Hz or 60Hz (Auto detect)
• Solar Charger controller: (you can disable our solar controller, and connect with external solar controller） 
• Solar Input Voltage Range: 60-145V(Max 3200W)
• Rated Charge Current: 80A
• Over Charge Disconnection: 59.2V
• Over Charge Recovery: 54.4V
• Over Discharge Disconnection: 43.2 V
• Over Discharge Reconnection: 49.6V

Packaging

• 18000W 48V Split Phase Pure Sine Wave Solar Power Inverter
• English Manual
• Remote Control
• BTS Cable
• Unit Weight: 197 LB
• Unit Size: 28.7 x 16.5 x 8.7 inch
• Shipping Weight: 232 LB
• Shipping Size: 34.25 x 21.3 x 17.3 inch

View and Download

• User Manual

Frequently Asked Questions

How do you connect this to a home with the multiple phase system?

• It only has dual phase output, 120V and 240V, it can't work with the multiple phase system, thanks.

Does this unit work with lithium batteries? Is there an adjustable curve for charge discharge voltages?

• It's ok to work with lithium battery, LiFePO4 in types is for lithium battery, in addition, we are sorry to advise the charge and discharge voltage can't be adjusted, hope your kind understanding, thanks.

Order a SunGoldPower 18000W 48V Split Phase Pure Sine Wave Solar Inverter Charger today from SolarParadise.com. Free shipping + free gifts on all of our SunGoldPower Inverter Chargers. Buy today and get a discount, free shipping, and a free gift!