SunGoldPower 10000W 24V Split Phase Pure Sine Wave Solar Inverter Charger

This inverter charger is built with UPS function to provide uninterrupted power to run household electric devices. The solar inverter comes with an internal transfer switch, so you don’t have to do anything when the power goes out. All the devices you have selected will be connected to the back-up power source automatically. In fact, you will not even notice that the power cut happened.

★ It is built-in 120 amp battery charger uses AC power, from the grid or from a generator, to recharge different kinds of battery bank.   
★ Built-in solar controller, Maximum solar input voltage 145V, Maximum solar input current 60A, can also connect with external controller.
★ Low Frequency Inverter, High Quality, your best choice for your 24V home system.

APPLICATION OF POWER INVERTER

The pure sine wave inverter can protect your electronic devices and provide reliable power. Pure sine wave help electronics less wear, kept sensitive electronics running smoothly to avoid the modified sine wave inverters which tend to damage electronics. The inverter can meet the power requirements of the appliances. In addition, the inverter/charger regulates the battery charging from other sources such as solar, wind or backup generators.

This power inverter has the direct-connect terminal block, which allows users to surpass the 10,000 watt capacity and harness its 300% surge power (up to 300,000 watts for 20 seconds as previously noted).
It can effective power your electronic devices, household appliance and power tools, especially the tools and appliances with startup surges, such as refrigerator, freezer, microwave.

This full sine wave power inverter was designed with top quality and durability in mind and is built to survive 10+ years in the harshest conditions. Our full sine wave 10KW inverter works with very little power loss, outputs an average THD of 3%. Its built-in battery charger can use AC power from the grid or from a generator, to recharge different kinds of battery bank.

The AC/battery priority switch is SW5. In AC priority mode, when utility AC power cuts off, the transfer relay is de-energized and the load is automatically transferred to the inverter output. Once the AC utility is restored, the relay is energized and the load is automatically transferred to AC utility. For solar systems, it is better to choose battery priority.

The Low Frequency Off Grid Solar Inverter is a multi-function inverter, combining functions of inverter, solar charger controller and battery charger to offer uninterruptible power support. The solar controller is Max 60A and 145V Input. You can disable the inbuilt solar controller, and connect to a larger external solar controller, or use for other systems (it is not limited for solar system).

The 10000w 24v inverter charger is a reliable power source for continuous backup applications. In inverter mode, DC power from the battery can be converted to AC power to power home appliances when a blackout in utility grid or when driving in mobile applications. It can also be a battery charger, which can convert the input AC power into DC power to charge the battery.

It is also perfect for off grid system or use AC power supply for home power emergencies, which can keep the power supply uninterrupted in the event of an power failure. It can detect the loss of power and switch over to get power form a connected battery bank seamlessly to keep the power supply constant.

During the emergency situations, the inverter can become a true UPS (Uninterruptable Power Supply) with its seamless transition transfer switch (batteries required). It can convert DC to AC power cleanly and efficiently. It can also automatically charge a battery bank when the city or generator power is available. The switch goes back and forth between city/generator power and inverter power automatically. 

Another popular application of this inverter is for RV and vehicle upfitting applications, such as powering lights and other appliances in an off-grid cabin. It also can provide electricity for a mobile business or mobile office, and running camping equipment. it is the best choice for your big power system.

Specification

Main Features:
10KW split phase pure sine inverter charger DC 24V AC 240V input AC output 120V/240V
Auto Generator Start (AGS)
Support Solar Panel with MPPT Function
Include Battery Temperature Sensor (BTS) and Remote Control
8 kinds of battery voltage selection ( lithium LiFePO4, gel, AGM and lead Acid batteries）
Compatible With All kind of Home & Office Appliances
Powerful Charge Rate Up to 120Amp, Selectable From 0%-100%
Built-in transfer switch and battery charge, backup or off grid power solutions
AC/Battery Priority Mode, Designates the Inverter-Preferred UPS Configuration
4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
8 ms Typical Transfer Time Between Utility & Battery,Ensure Power Continuity
15s Delay Before Transfer when AC Recover, Protection for Load when Used with Generator

Main Specification：
Continuous Output Power :10.0KW
Surge Rating(20s): 30.0KW
Output Waveform: Pure Sine Wave
AC Output Voltage: 120V and 240V
AC Input Voltage: 240V ( not suitable for AC 120V input )
DC Battery Voltage: 24Vdc
Solar charger Current: 60Amp
AC Battery charger: 120±5Amp
Output Frequency: 50Hz /60Hz
Typical transfer Time: 10ms(Max)

DC Input:
Nominal Input Voltage :24.0Vdc
Minimum Start Voltage :20.0Vdc / 21.0Vdc
Low Battery Alarm :21.0Vdc / 22.0Vdc
Low Battery Trip :20.0Vdc / 21.0Vdc
High Voltage Alarm :32.0Vdc
Low Battery voltage recover :31.0Vdc
Power Saver on Idle Consumption: 35W
Power Saver off Idle Power:150W

Charger :
Output Voltage: Depends on battery type
Battery Initial Voltage for Start Up: 20-31.4V
Over Charge Protection Shutdown :31.4V
Charger Breaker: 80A
Input Voltage Waveform :Sine wave (Grid or Generator)
AC input range:184-253Vac/140-270Vac
Nominal Input Frequency :50Hz or 60Hz (Auto detect)

Solar Charger controller: (you can disable our solar controller, and connect with external solar controller）
Solar Input Voltage Range: 30-145Vdc
Max.PV Open Circuit Array Voltage: 145Vdc
Rated Charge Current: 60A
Over Charge Disconnection: 29.6V
Over Charge Recovery :27.2V
Over Discharge Disconnection:21.6V
Over Discharge Reconnection :24.6V

Packaging:
10000W 24V Split Phase Pure Sine Wave Solar Power Inverter
English Manual
Remote Control
BTS Cable
Unit Weight: 149 LB
Unit Size: 27.6 x 16.5 x 8inch
Shipping Weight: 183LB
Shipping Size: 33 x 21.3 x 16inch